Recladding vs Overcladding: Key Differences and Benefits

• aluminium facade systems • building facade upgrades • building recladding • commercial building recladding • DtS cladding • facade renovation • facade replacement • fire safety cladding • NCC compliant cladding • non-combustible aluminium cladding • overcladding • overcladding benefits • recladding Australia • recladding benefits • recladding vs overcladding

Recladding vs Overcladding: What You Should Know

Upgrading building exteriors for safety and modernisation is increasingly common within the construction industry, especially for commercial, industrial, and high-rise residential buildings. Many owners are embarking on recladding projects to improve and future-proof their investments.

One decision that must be made is between recladding and overcladding: which is the most suitable approach for your building?

Key Insights

·  Recladding is the comprehensive, full replacement of a building’s façade. It strips out and replaces all old façade materials, exposes the substructure, and enables full inspection and rectification of underlying issues if they are present.

·  Overcladding is the installation of a new cladding layer over the existing façade material. It provides a quicker, more cost-efficient “facelift” for a building but has some serious limitations and is not suitable for all buildings.

·  Choose a superior, durable DtS non-combustible aluminium cladding system in Australia to optimise fire safety performance, maintain compliance, enhance thermal efficiency and acoustic performance, boost weather protection, and, when the right system is chosen, maximise sustainability.

Recladding or overcladding with a superior material such as DtS non-combustible aluminium cladding is an effective way to improve both the appearance of a building and its long-term performance. The process can be complex, and the right blend of architectural sensitivity, technical insight, cladding material selection, and project co-ordination is imperative.

Whether a recladding or overcladding approach to the project is selected should be determined by factors such as:

·  Building age

·  Existing mechanical systems of the building (substructure, foundations, building size)

·  Type of existing cladding (e.g. combustible versus non-combustible)

·  Construction logistics (e.g. occupied building)

·  Budget considerations

What is Recladding?

Recladding is a comprehensive process that completely removes the existing exterior façade of a building (e.g. old, combustible cladding panels) down to its original substructure and replaces it with a new exterior wall system. The old material is totally stripped back, providing an opportunity for builders to properly inspect the underlying structure for issues such as water ingress, rot, mould, insect damage, corrosion, etc. Before new cladding is installed, any required structural repairs can be undertaken, thereby ensuring building integrity going forward.

Recladding is usually the best choice if the existing cladding is:

·  Non-compliant (e.g. polystyrene core ACPs)

·  Degraded

·  Compromised

·  Existing insulation should be replaced (e.g. asbestos in old buildings)

·  There are signs of water ingress within the building

A recladding project allows for a totally new, compliant, high-performance, state-of-the-art façade system, with new insulation and innovative architectural cladding materials that deliver in terms of fire safety, weather protection, energy efficiency, sustainability, and long-term value.  

This option is more time-consuming and expensive at the outset than overcladding; however, it is the superior choice in most settings and usually more cost-effective in the long term.

What is Overcladding?

Overcladding may be suitable for updating old, faded, bland, or otherwise outdated facades that are otherwise structurally sound. It directly covers the existing wall (e.g. masonry) with a new layer. This overlay method of adding new façade materials eliminates the need for demolition and removal of existing materials, and is a viable option for properties where the existing façade is securely attached to the building, structurally sound, and there are no concerns about the integrity of the substructure or insulation materials.

Limitations of overcladding must be understood. As old cladding remains in situ, inspecting, identifying, and repairing underlying damage is impossible with this approach. In the presence of unidentified structural issues such as corrosion, rot, termite damage, or moisture-related problems (e.g. mould), overcladding can trap and exacerbate these. It also amplifies the overall weight on the building’s structure, so it’s essential to ensure the framing and foundation can support another layer on the façade.

In the right circumstances, however, this “quick facelift” option is less disruptive overall than a recladding project. It may also offer enhanced insulation outcomes, as there is a second layer added to the façade. In the right circumstances, it can be a faster, more cost-effective exterior wall solution.

Does Your Building Need Recladding?

Properly planned and executed, and with the right materials, a recladding project (or overcladding in certain circumstances) completely alters the aesthetic and performance of a building. Modern, superior cladding products and installation projects are indicated when you wish to:

·  Modernise and distinguish your design aesthetic

·  Resolve structural issues

·  Rectify water ingress/moisture issues

·  Improve fire safety performance

·  Enhance protection from weather, pollution, UV, and corrosion

·  Enhance thermal performance

·  Boost energy efficiency

·  Maintain compliance with the NCC

·  Improve building sustainability

·  Reduce long-term costs

Final Thoughts

Select a superior, experienced cladding supplier/project partner: one who brings not only a diverse range of versatile design options, but also deep insight and expertise in recladding. The right partner will deliver a tailored strategy that aligns with your design vision and of

 


← Publicación más antigua


Dejar un comentario

Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados