New THOMSIT renovation system – renovate areas in need of repair easily and quickly
The new screed surface can be used within three to four days
The new sixth renovation system from THOMSIT is particularly suitable for the time- and cost-efficient renovation of partial screed areas in need of repair. The removal and disposal of the old screed is not necessary. Especially in the case of existing properties such as rental apartments or in trade fair construction, craftsmen benefit from the practical and also waste-avoiding renovation solution, which enables the new area to be used within three to four days.
With the new renovation system, THOMSIT is continuing the annual campaign that started last year. With the THOMSIT renovation systems, craftsmen on the construction site are well equipped to handle even demanding renovation cases easily, efficiently and successfully thanks to specially coordinated products.
Time is often short when it comes to renovations, which is why quick and uncomplicated solutions are particularly in demand on the construction site. With the new sixth THOMSIT renovation system, areas in need of repair can be renovated in a particularly time-saving manner. This is often necessary when refurbishing rental properties or in trade fair construction. If large sections of an old screed have to be renewed, for example due to a broken or broken floor, these can be repaired within just three to four days with the new sixth THOMSIT renovation system.
THOMSIT E 37 M: variable quick-setting mortar for renovations in commercial and residential buildings
THOMSIT E 40 H: Mortar bonding agent for bonded screeds and cement mortar
THOMSIT R 727: cast resin for the non-positive closing of fine screed joints and cracks
Thanks to the explanation of the individual processing steps in the new flyer from THOMSIT at thomsit.de/loesungen/renoviersysteme/fix-zum-neuen-estrich, craftsmen can use the new THOMSIT renovation system simply and easily.
The repair filler THOMSIT E 37 M also scores with a high processing comfort. Craftsmen benefit from a longer processing time of around 45 minutes compared to other quick repair putties. Thanks to the variable mixing ratio, THOMSIT E 37 M can also be set to be earth-moist or free-flowing, which makes processing even easier.
The new THOMSIT renovation system is not only very cost-efficient, but also sustainable. The removal and disposal of the old screed is not necessary. By avoiding waste, remediation is environmentally friendly. In addition, all products of the new THOMSIT renovation system are low in emissions (EC 1 Plus) and thus contribute to healthy living and environmental compatibility.
You can find more information about the THOMSIT renovation systems at thomsit.de/loesungen/renoviersysteme, about the new sixth THOMSIT renovation system for the simple and quick renovation of partial screed areas in need of repair at thomsit.de/loesungen/renoviersysteme/fix-zum-neuen-estrich .
“Craftsmen are under increasing pressure to complete construction projects as quickly and cost-effectively as possible. In addition, sustainable renovation is increasingly coming into focus. Ideally, the products used should be easy and convenient for the craftsmen to work with. A high standard that our sixth THOMSIT renovation system also absolutely lives up to. Products that are perfectly coordinated with one another help to implement demanding renovation projects simply and efficiently,” says Stephan Tschernek, Head of Marketing at the PCI Group.
About THOMSIT
Under the THOMSIT brand, the PCI Group offers a complete portfolio of floor laying systems in Western Europe - from subfloor repairs and subfloor preparation to the bonding of floor coverings. Further information on THOMSIT at www.thomsit.de.
With the new renovation system, THOMSIT is continuing the annual campaign that started last year. With the THOMSIT renovation systems, craftsmen on the construction site are well equipped to handle even demanding renovation cases easily, efficiently and successfully thanks to specially coordinated products.
Time is often short when it comes to renovations, which is why quick and uncomplicated solutions are particularly in demand on the construction site. With the new sixth THOMSIT renovation system, areas in need of repair can be renovated in a particularly time-saving manner. This is often necessary when refurbishing rental properties or in trade fair construction. If large sections of an old screed have to be renewed, for example due to a broken or broken floor, these can be repaired within just three to four days with the new sixth THOMSIT renovation system.
THOMSIT E 37 M: variable quick-setting mortar for renovations in commercial and residential buildings
THOMSIT E 40 H: Mortar bonding agent for bonded screeds and cement mortar
THOMSIT R 727: cast resin for the non-positive closing of fine screed joints and cracks
Thanks to the explanation of the individual processing steps in the new flyer from THOMSIT at thomsit.de/loesungen/renoviersysteme/fix-zum-neuen-estrich, craftsmen can use the new THOMSIT renovation system simply and easily.
The repair filler THOMSIT E 37 M also scores with a high processing comfort. Craftsmen benefit from a longer processing time of around 45 minutes compared to other quick repair putties. Thanks to the variable mixing ratio, THOMSIT E 37 M can also be set to be earth-moist or free-flowing, which makes processing even easier.
The new THOMSIT renovation system is not only very cost-efficient, but also sustainable. The removal and disposal of the old screed is not necessary. By avoiding waste, remediation is environmentally friendly. In addition, all products of the new THOMSIT renovation system are low in emissions (EC 1 Plus) and thus contribute to healthy living and environmental compatibility.
You can find more information about the THOMSIT renovation systems at thomsit.de/loesungen/renoviersysteme, about the new sixth THOMSIT renovation system for the simple and quick renovation of partial screed areas in need of repair at thomsit.de/loesungen/renoviersysteme/fix-zum-neuen-estrich .
“Craftsmen are under increasing pressure to complete construction projects as quickly and cost-effectively as possible. In addition, sustainable renovation is increasingly coming into focus. Ideally, the products used should be easy and convenient for the craftsmen to work with. A high standard that our sixth THOMSIT renovation system also absolutely lives up to. Products that are perfectly coordinated with one another help to implement demanding renovation projects simply and efficiently,” says Stephan Tschernek, Head of Marketing at the PCI Group.
About THOMSIT
Under the THOMSIT brand, the PCI Group offers a complete portfolio of floor laying systems in Western Europe - from subfloor repairs and subfloor preparation to the bonding of floor coverings. Further information on THOMSIT at www.thomsit.de.